There are sure signs you should not avoid when it comes to plumbing issues, no matter how minor they might appear. Unfortunately, sometimes the most innocuous or minor plumbing faults can be the most expensive or challenging to fix, whereas the most concerning and apparent signs can be the opposite. This is why you should never ignore any issues with your plumbing, no matter how minor they may seem.
In this article, we will walk through some of the most common yet overlooked plumbing problems and why you shouldn’t ignore them!
Leaking taps are a cost killer because they can cause a lot of water wastage, which can seep into your monthly water bills. For example, if you have a continually dripping faucet, you’re slowly wasting water, which can build up over time. This is why you want to get this issue fixed as promptly as possible. It is the best if you contact your local plumber like Mister Plumber.
Often, the solution is straightforward – a simple tightening of a few screws or the replacement of a few defective parts. A trained plumber can get this done quick flash; however, if you have experience in this area, you might be able to handle this one yourself.
Low water pressure
Most homes experience low water pressure at some stage. Multi-storey homes have this issue because the system might be unable to service all outlets of the home adequately. However, if you find that the pressure is steadily getting worse (or appearing out of nowhere), then we strongly recommend that you get in touch with a qualified plumber as soon as possible.
Another common plumbing issue is often related to heating. Hot water problems can be the most frustrating, especially during those winter months. If your system is suddenly unable to produce any hot water, then the heating element is either defective or damaged. Don’t delay getting this fixed if it does occur. It’s nearly impossible to function without hot water, whether it be for hygiene or cooking purposes. Manually heating water takes a lot of time and effort as well.
A leaking toilet is a big concern; however, it’s often a simple fix. Leaky seals affect all bathrooms after a while, especially once the seal begins to break down and deteriorate. Indeed, this is why you need to be careful with what you are flushing down your toilet. Things that won’t break down quickly can be a real issue (like female sanitary products, condoms and even tissues). If your toilet starts to leak, make sure you contact your local plumber for assistance.
A severe blockage in your bathtub or sink can be a real nightmare. It can produce a foul smell and gurgling sounds, which can be a real nuisance. Before calling a professional, there are several things you can do (quite easily) to remedy the situation. Use a chemical drain block remover to see if you can remove the blockage. You can buy a high-quality one from your local grocery store or specialist hardware/homeware store.
The cause of the blockage is likely hair, accumulated soap or grease (from cooking). If you don’t have access to blockage removal, you can easily whip up something at home to do the job. Start by pouring boiling hot water drain the drain (if the blockage is loose, then hot water is sometimes sufficient). If that doesn’t work, add some bicarbonate soda and vinegar to the water. Pour the solution down the drain and wait a few minutes (you should hear some fizzing from within the pipes – this is normal). We recommend using a plunger to help soften the blockage and help loosen it within the pipes. This can help dislodge whatever is stuck in the drain by creating a vacuum seal around the blockage.
So, there are a lot of issues that can arise and affect your plumbing system. The most important piece of advice we can give you is this – don’t ignore signs that your water system needs to be evaluated (no matter how small they are). Over time, these issues can build up, meaning it won’t just be your shower leaking – it’ll be your wallet too.